|
All images © Bob Atkins
This website is hosted by:
|
 Author
|
Topic: Modifying the Canon EF-S 18-55 *IS* lens for use on Canon 10D? (Read 12592 times)
|
E7RNN
Newbie
Posts: 1
|
I've read the artical on modifying the Canon EF-S 18-55 lens for use on Canon 10D ( http://www.bobatkins.com/photography/tutorials/efs-10d.html) Does this work for the Canon EF-S 18-55 IS version also? Does anyone have any experience with this and are there things that are different compared to the non-IS version. Any help is much appriciated! |
|
|
|
|
Logged
|
|
|
|
|
|
yayas
Junior Member
Posts: 35
|
I saw in the local market it's being cut to fit 10D.
Don't know the details about the process, but that cut-out works.
I'm convinced Bob have the exact answer on this.
|
|
|
|
|
Logged
|
|
|
|
|
Bob Atkins
|
Nope, I have no answer!
There's no reason why the IS should make much of a difference. If you can remove the rear part of the mount that interferes with the 10D body, I'm guessing it should work fine.
Since I no longer have a 10D, I'm not modifying lenses anymore!
|
|
|
|
|
Logged
|
|
|
|
yayas
Junior Member
Posts: 35
|
oops...  Yes I saw someone cut the rear part, I would think it's similar with non-IS version. If their mounts are similar, it should need the same work to fit in 10D. |
|
|
|
|
Logged
|
|
|
|
|
KeithB
|
Just make sure that the extra stuff in the IS version did not cause the glass to protrude past the ring when you cut it.
|
|
|
|
|
Logged
|
|
|
|
poppy79424
Newbie
Posts: 3
|
Hello All, this is my 1st post here. I read Bob's article about converting the ef-s lens to fit my 10D, so I found one and tried it and it worked. I recently found the IS version of this lens and did the modification to it as well. The main difference is there is a tiny ribbon or printed circuit attached to the plastic lens mount. I cut mine about 1/16" higher on the IS lens because the printed circuit is attached just below where I cut. I should have taken photos, but I didnt. It works perfectly on my D10
|
|
|
|
|
Logged
|
|
|
|
|
 |
|
